-
Port-Forwarding into SENSE subnet
I have trouble in port-forwarding into the SENSE subnet, cause my router (FritzBox 7390) isn't able to forward ports into a subnet and SENSE is not able to implement port forwardings. So is there currently a solution for that?
-
Lost ALL my devices!?
I have lost ALL my devices on my configuring device, waited a few days but nothing happens. Once I had 17 devices, configured them all, got a few blocked threats (7) and at some point the devices dissapeared (the threat counter stayed at "7"). So I deleted the App data, but through this I lost the possibility as…
-
Sense blocking traffic, twitter instagram
I have the following setup ISP-Sense-Accesspoints-wireless clients. Clients are Android, IOS and Windows based. It seems that Sense is sometimes blocking traffic from wireless clients and sometimes not. This is really annoying. The APs and Sense have separate Wifi-networks but it does not matter if they are providing same…
-
What tracking information is blocked by the Sense?
Definition on Internet: Tracking is the collection of data regarding a particular user's activity across multiple websites or applications that aren’t owned by the data collector, and the retention, use or sharing of that data. Test case: SUPERAntiSpyware is installed on my TEST-PC. A full Complete Scan is run and all…
-
Can´t setup app on iPhone
I have set ut my network with an iPhone, and that works. But when I try to setup the Sense app on other iPhone´s and iPad´s,to protect it, it´s not possible. I only got the message to setup a new network, not start the Sense app so it protects the phone. (see picture) I have tried to set it up on an Android phone, and that…
-
Swann cctv system not found on iPhone after installing SENSE
Before installing SENSE, I could control my Swann cctv system and view video feeds from all cameras on my iPhone. Since installing SENSE, this is no longer the case. There is a comprehensive array of network settings that I can adjust in the Swann network settings page, but I do not know what these are or how they should…
-
Sense connection method change to router
Initially I configured Sense to connect my internet router with wifi. Now I moved Sense so close to my router it is possible to connect cable. I believe this makes secure sense network faster. But does this work just by connecting cable or do I have to make factory reset and configure sense again with cable?
-
SENSE is not a primary router replacement (yet?)
Ok, so I finally got around to switch my home network to use SENSE. Most of the setup worked fine, but there are some major hurting points that I have: - SENSE does not support PPPOE. That means, I have to keep my old primary router up and running because something on the network has to connect to my ISP. Which my old…
-
Why SENSE does not recognize all device names?
It seems that SENSE can recognize only the names of Windows computers, IPhone, my HP printer and Buffalo NAS. But it can not recognize names of Windows phone, Android phones, Philips TV, nor the Sony Blue-ray player. Why is that? It's a bit frustrating...
-
Sense does not like the url http://*.likebtn.com, what to do with 129 threats?
Hi, I have googled what it does, but as I can read, its used by several blogs. Now as I have Sense up and runing, but I cannot find out if I should whitelist it or not. I have 129 threats in my log, and I dont want to read one by one, they are all from http://*.likebtn.com So, question is. How can I as a user, be sure this…
-
Twitch chat, intermittent unable to connect
First of all, not sure this is because of Sense. Anyway I've been watching Twitch a lot since getting my Sense up and running. I've noticed that the Twitch chat is constantly saying "Sorry, we were unable to connect to chat. Reconnecting in 2 seconds.". I don't remember this happening some time back. Since I've had Sense…
-
Couple of problems with starting to use Sense
1. Connecting additional mobile devices. I initially installed the network with my Android phone. Then installed the Sense software on my iPhone, but it just wants me to create a new Sense network. How do I connect it to my current one? It's using the WiFi via Sense just fine. 2. Freedome on Android and Sense. When I start…
-
Sense protection with additional wap/switch / power lan behind it
hi, the wireless connection from the sense to my iot device is to weak, so i have to place a wap between them. will my iot device , in this case a doorbell , still be protected or less as it won' t be abel to recognize and categorize the iot device correctly? the same would be for a switch or power lan behind the sense…
-
Https Scan and malware/ detection of abnomal behaviour
if https is not scannend and most of iot devices use https how will this device (sense) help secure my network or the abnormal behaviour of the affected device if it doesn't know what its up to?
-
Browsing protection and tracking protection with Sense and other F-Secure products
So I was just wondering that when I use have Sense as network device with all the protection options on, should I also have Sense's windows pc client's Browsing protection on? And also even top of that should I have Freedome's Browsing protection and Tracking protection on when using Sense device's network? Example:…
-
SENSE vs SYN Flood ??
I'm still trying to figure out why my internet connection is either extremely slow or not working at all while SENSE is protecting my devices. I checked the router firewall log, and looks like this, what is my SENSE router (192.168.0.4) doing? Firewall Log Description Count Last Occurence Target Source SYN Flood 9 Fri Jul…
-
Ghostery blocked
One more strange blocking: trying to setup Ghostery (I use the Firefox extension), the extension says, while I try to connect it, "We encounter a problem". Access to their website ( https://www.ghostery.com/ ) give this error (it's not a blocked page): "Secure Connection Failed" If I untick "Tracking protection", all works…
-
SENSE whines about no connection even though nerwork works
meanwhile, the internet works...
-
Sense Speedtest differences
Hi, I did run KPN’s Speedtest from the same PC directly connected to my provider's router (Fritzbox 7390) and next connected to the F-Secure Sense. I have an synchronous fiber connection of 100Mps, which is limited to 80 Mbps on the download site. Results maximum download speed without Sense: 79 Mbps, with Sense 52 Mbps,…
-
Not possible to set up the app on a second device
Setup of the application on a second device does not work as the sense does blink anymore when pressing the blue bottom which prevent the ne device from pairing with the sense.
-
SENSE WAN PPPoE configuration lack
I have a modem/router provided by my ISP, it is in bridged/routed mode and I have the ability to run a PPPoE connection with username and password from a PC or a capable device. I did several attempts but i can't make a bridged PPPoE connection from SENSE, in the SENSE app under the wan configuration there is only the…
-
Troubleshooting: Issues accessing websites
Browsing protection feature of SENSE protects users and devices from accessing URLs that are classified as unsafe in the F-Secure cloud. Typical user visible behavior appears as follows: * If the request is accessed through unencrypted protocols (http) SENSE redirects the user to a block page. * If the connection request…
-
Optional Sending of infected files when found
Hello Sense Team, my objective is about the "infected sample sending" into your cloud/lab when something malicous or a new type of infection is being detected. For me it is absolutely crucial that not any data that could be confidential (for example program code from customers of mine or documents) are being sent…
-
Sense stuck on booting up?
Hi, It seems that my sense is somehow stuck on booting up. Yesterday I changed the position of my wan router, so it was shutdown. Then i noticed that the sense is stuck on rotating the symbols 4 squares - two rows of time symbols, which mean it's booting up? So hard reseted my sense, it showed up the FF and the it is again…
-
Problem with accessing my NAS behind Sense via DynDNS
Hi there! I just installed the Sense at home and so far everything works fine. Now I want to connect my Synology NAS to the Sense to also protect it. To date this NAS was reachable via DynDNS, wherefore I used port forwarding at my FritzBox. Simply connecting the NAS via LAN does not work, so I tried opening the same ports…
-
How to create a safe way to access my home webcam?
Hi, Here's the problem. I own a Foscam cam that is used as a security camera. I haven't used it from external networks before, because I know they have their problems with login (no ssl support for login and more). I tested a setup like this, and it works, but is it at all safe? -Sense connected to adsl router with cable…
-
When a fully functionnal Android
When will the Android app updated to allow port forwarding ? It isn't professional at all: why a BASIC feature available on IOS isn't on Android ? Are Android user under-customers ? Hey, wake up ! You aren't the center of the world, there are other similar solutions (i.e. Symantec) To long to wait, enough is enough.
-
VPN connections
Hi, I recieved my SENSE earlier this week and been fiddling around to get it in to my network setup. Setup was easy and fast and the SENSE network seems to be working real good directly patched in to the fiber socket. But I'm wondering what SENSE actually block..? Before the SENSE I had a Synology RT1900 setup with a…
-
Nefit ModuLine Easy thermostat
It was quite hard to get my Nefit ModuLine Easy thermostat online. The whole time the Nefit Easy stated that it did not get a connection to the internet when I was running the setup of the Nefit Easy: - I'm able to setup the WIFI as is explained in the manual of the Easy (hard reset is really necessary, otherwise it does…
-
Wifi, why two SSID ?
Hi, with Sense I have two SSID (before I never used an "ac" Wifi hotspot, maybe it's normal) I have a <mySSID> SSID (!!!) and another one <MySSID>_5GHz Why this second one ?
