-
How to change the "master" mobile phone to another
Sense network was created with one device, and it shows all settings and so on. I have a new mobile phone, how to change that to the controlling device?
-
Sense not working at all !
Hi, the Sense drive me nut. A first time, I could create the WiFi SSID, and create a cable Internet connection. After a while, the app (on my Android) said the Sense need to be updated. The update didn't succed at all, and the app said I have to reset it to the factory settings. I did this, Sense displayed "FF", and I…
-
SENSE for Windows is not yet activated
Hi, when I try to install/download the SENS app for Windows from http://sense.router/ I get the following error message. "SENSE for Windows is not yet activated. Check the subscription status from the SENSE app and try again later." In the SENSE app on my Androind it says "ACTIVE Valid until June 30, 2018" Any tips on what…
-
Sense network slow
I have noticed a significant slowness every now and then in my Sense network. Mobile games like Clash Royale lag a lot when I use Sense network (normal or 5ghz). I still have my old non Sense wlan up and running and on that everything is running smooth. Every now and then I get no internet notification on Sense network and…
-
Sense on windows pc causes windows bootup freeze
Hi, I uninstalled my F-Secure safe in order to switch to sense app on my win pc, but the sense app causes the pc boot up to freeze when sense app autostarts. Or it can also be that sense+freedome cause this. So solved the freeze issue by uninstalling the sense app from safe mode. Then when i tried to install it back it…
-
Is it possible to deactivate the 2.4 GHZ network?
Hi there, the question is already in the topic of this message: As I have a WiFi repeater, that automatically connects to the 2.4 GHZ network, not the 5 GHZ network: Is it possible to deactivate the 2.4 GHZ network of the Sense? Thanks for a short answer Florian
-
Troubleshooting: Wrong time on clock / incorrect timezone
After the setup is finished SENSE will show the current time on the display. It keeps time by regularly synchronizing the clock with a time server. When SENSE powers on the clock may be initially out of sync. This is because the device does not have a battery backup for keeping the time when it is powered off. SENSE will…
-
Troubleshooting: Updating SENSE prior to running setup
SENSE router can update itself prior to running setup if it is connected via CABLE to a working internet connection. This allows running the setup using the latest firmware with all available fixes and bypass the firmware update part of the setup process in the application. * Check that the internet connection on your…
-
Trouble to access Synology NAS when wired to SENSE
I wired my Synology NAS with a LAN cable to SENSE, expected to be in the same network as my mobile device, from which I tried to connect to the NAS by using the secure WLAN from SENSE. But I cannot find the diskstation here. I have to leave out SENSE completely to get access to the NAS again, by connecting my NAS and a…
-
Sense working properly?
I am using iPhone and made a little test. Put Freedome on, went to iltalehti.fi and iltasanomat.fi. Freedome blocked 14 tracking attempts. Connected to my Sense (freedome off this time). Went to same pages, blocked 0 tracking attempts. Also when i go to unsafe.fstestdomain.com, it does not show message intended to. It just…
-
Sense USB Port
Okay, correct me if I am wrong, but I assumed the USB Port on Sense is for plugging in external hard drives? I want to use a hard drive as a media server with Plex but after plugging in two different hard drives into Sense, none of them show up under "Network" in Windows 10 or anywhere in Windows File Explorer?!? Are there…
-
F Secure Sense in set-up with modem and wifi router
Hi everyone, after a long wait I have now finally received my F Secure Sense ... but after unboxing I noticed that obviously back then when I ordered the device I had misunderstood one point: I was not aware that the F Secure Sense also serves as a secure WiFi router. So my original assumption around the set-up seems to…
-
allow blocked application trough Sense
Hi, sense is blocking a proxy application (Menlo Security) that I need for my work. Is there a way for me to allow it?
-
Problems with setup
I've got an issue with the installation of Sense. I was able to connect to Sense, and got info that Sense needed to update. After the update, Sense is then stuck on the update symbol (several minutes) and the app says the update was not completed successfully. I then I took the power on it. It then comes up with the symbol…
-
F-secure Sense windows setup not working
I have nog recieved my F-secure sense. I only have Windows Phone (no iPhone/Android). Have Windows 10 PC, connected to the Sense setup network. http://sense.router = cannot show page Going to e.q. www.google.com redirects to the sense setup page. When I click "Download F-secure SENSE" = "This operation could not be…
-
Display of temperature?
In very early product presentations of SENSE there was a temperature display shown on sense. Was is discontinued during the development process?
-
Dramatic loss of internet speed
With te switch from FRITZ!Box 7490 wireless (XS4ALL provider here in NL) to SENSE wireless I've 'lost' more than half of te speed I'm paying XS4ALL for... http://beta.speedtest.net/result/6410197146 … with SENSE http://beta.speedtest.net/result/6410208886 …without SENSE Any comments...?
-
Poor wifi coverage
Does anyone else get poor wifi coverage with their Sense device? In my small living room I get a "good" signal at best, and the access point of my older router in the other room is stronger. I've used several wifi signal analyzers to test both the 2.4GHz and 5GHz ranges and the results are consistent: average signal…
-
Cannot access sense settings from app if sense router does not have internet access
Hi, I noticed a pretty weird problem as it seems that I cannot access sense settings from the app if sense router does not have internet access. But I can connect to the wlan, but it shows on the android's wlan settings as "Connected, no internet access". So if I do something wrong when configuring my sense network…
-
Smart Label Device List
I noticed there are a few smart device icon/labels needed Smart Plug Smart Sensor
-
Question on Sense Subscription
How does the Sense subscription work? I talked to someone on Fsecure chat and they tell me to check my Digital River purchase email. I logged into my Digital River account and all I can see is a one off payment for £169 for Sense router? Since I paid via Paypal for Sense, I checked my Paypal account for pre-approved…
-
Accessing router outside the SENSE-network
Hi, The SENSE-app informs that SENSE router cannot be reached when opening the app outside the SENSE-network (wlan). Is it so that current protection status of the network can only be viewed and changes to the network/protection settings made when connected by wlan to the SENSE-network? I have possible double-NAT situation…
-
Website category filtering
Does Sense have the ability to filter/block website URL/domains by categories? For example can you block based on categories like advertising, Adult, Social Networks, Games, ect?
-
Show SENSE logfiles and test functionality
I am interested to explore more details about the scanning process. Is there a possibility to download logfiles? Can I test the devices for functionality (similar to EICAR-Virus)?
-
SENSE and a gigabit switch
I have my desktop pc, a network disk and a burglar alarm connected to a gigabit switch, which in turn is connected to my router. When I plug it into SENSE it is not recognized as a new device. What do I need to do? -- Keith
-
F-Secure Sense IOS app not working on iPad Pro
As soon as the app is installed on an iPad Pro, it shows the intro screens on the top 70% of the screen. There is no way to start the installation instructions or see any other management screen. The iPad-Pro does shows up as device in the F-Secure Sense app of an iPhone, so it recognised the app as installed. Update of…
-
Clock Brightness + 12hr
Is there a way to dim the clock during 12am to 6am as i find it very bright while im in bed. Also can i change the clock from 24hr to 12hr clock so 16:00 is 4:00
-
Android app update
Hi, Sense on Android has just updated. There's no changelog. Still no port forwarding; what was new ?
-
Sense Windows App
What is the Sense Windows App? Is it a rebranded version of F-Secure Anti-Virus, F- Secure Internet Security or F-Secure Total? What exactly are the features of the Sense Windows App?
-
Cable connection to router not working
Hi, I want to connect my router with sense, using the included cable. The LAN-port of my router has internet, I double verified with a laptop on the same port. But unfortunately, when connecting to sense, the app says "Something went wrong. Check that the cable is connected correctly and that your internet connection is…