Access VPN from macOS Tahoe 26

racker4Life
racker4Life Posts: 6 Explorer

How can I get the FSecure VPN to work on my macOS Tahoe 26?

  • All the macOS-VPN troubleshooting instructions I found in this forum are more than 2 years old and the same network extension configurations are not available in a modern macOS.

Answers

  • racker4Life
    racker4Life Posts: 6 Explorer
    edited October 27

    Essentially, the VPN window is continually displaying Loading … Please wait., but never loads.
    - I've tried multiple restarts and it has never loaded from day one of installing and activating my FSecure subscription.

  • Ukko
    Ukko Posts: 4,137 Superuser

    Hello,

    Since this can be a technical trouble, some sort of logs or investigation will likely be required. It is therefore best to contact them directly (if attempting to sort out the problem with the help of the community does not yield results right away). As an initial entry point, you can use options as phone call or web-chat there: https://www.f-secure.com/gb-en/support (or your local page; provided one is "EN-GB"), then they can switch communication to email channel or something.

    In general, this KB article (VPN in F-secure TOTAL app does not load and is gray and you can't press anything) and some less-than-year-old topic (Why VPN is not working after Total renewing?) with suggestion to solution as a (re)installation or uninstalling / installing back.

    However, since your experience is about "from day one of installing". Can you clarify some points?

    • is it F-Secure TOTAL app / subscription? or is it only F-Secure VPN app / subscription?
    • did you use any F-Secure VPN products before this installation? Is there possibility of another VPN product alongside with installed F-Secure product now?

    I am not familiar with macOS platform. So, sorry, but may I ask if you tried (or if it was visible) to follow 'activation' steps or something? Like described in this kb article (How can I activate the new F-Secure VPN on MacOS?) or within this discussion (Mac F-secure VPN stopped working)? It seems, partially, should be still valid for Tahoe 26.

    If VPN Settings are accessible in F-Secure UI - can you try to switch protocol in use? Or entire module is disabled now?

    Can you check macOS settings about mentioned places (in articles/discussions above): System Settings :: General :: Login Items & Extensions. And is there listed something with 'Extensions' as warning or something. And double-check whatever permissions are applied there or here.

    Or did you mean that exactly this stuff is not available in a modern macOS (by referring to ""the same network extension configurations"")?

    I mean, based on "What's New For macOS" releases - there were 'a lot' of improvements for Tahoe 26 and VPN support.

    // perhaps, since you were able to make a purchase, it is likely that this product is supported in your location. However, just to be sure, you might want to verify whether F-Secure VPN is indeed offered in your market. Otherwise, 'initialization' can be blocked by either side (your ISP or whatever local network; or F-Secure servers or infrastructure).

    // and because you may have some experience with F-Secure products before, maybe uninstalling, some further clean up (https://www.f-secure.com/gb-en/support/tools - such as "Uninstallation tool for Mac") can be an option as well. But I did not see using that tool for Mac as a general or common recommendation (and it may remove some important data like password vault's or so; better to use it within official Support's advice).

    Thanks!

  • racker4Life
    racker4Life Posts: 6 Explorer

    Thanks for the reply Ukko.
    Other than a recommendation to contact support, I don't see any recommendation of actionable advice or support in your response. But I will answer some of the questions regardless, in case there is another bot that find a solution.

    is it F-Secure TOTAL app / subscription? or is it only F-Secure VPN app / subscription?

    There is not a clear description on my invoice. My invoice says "Internet Security," "VPN," and "ID Protection. So yes: I have a subscription for VPN services, but it is not working on my macOS.

    did you use any F-Secure VPN products before this installation? Is there possibility of another VPN product alongside with installed F-Secure product now?

    No. This is a new computer with a macOS. I never set up a VPN on this computer.

    perhaps, since you were able to make a purchase, it is likely that this product is supported in your location.

    Of course. I don't see in reality, why location in the modern western world would affect the functionality of this product, especially when VPN are designed to manage the apparance of location.

  • Ukko
    Ukko Posts: 4,137 Superuser

    Hello,

    Thanks for your response.

    Other than a recommendation to contact support, I don't see any recommendation of actionable advice or support in your response.

    Well, basically, there was a reference to the KB article (this) and discussion (this), where the solution was considered to be "reinstallation" of the software.

    But given that the descriptions are generally vague and it is not entirely clear what is related; and since your problem, as you wrote, has been "from day one" - it is not a fact that this would have helped. Unless it was somehow a faulty installation process or a previous unfixed error on that system. However, you can still try if you have the desire or time.

    Another possibility is that it is a known bug / trouble or a known limitation. Again, there was a reference to the KB article (this; in my original comment: I provided the wrong URL) and discussion (this). There does not appear to be any active known bug or trouble, but certain activation steps or the ability to double-check permissions or system settings (like stuff within System Settings :: General :: Login Items & Extensions) may still be relevant for the Tahoe 26.

    Anything beyond that will likely require details and some logs. There is an option to create them using a diagnostic tool (guide). However, sharing it publicly with the rest of the community is not recommended. You can try examining them yourself, though. The cause of the VPN initialization failure may be clearly and understandably indicated there.

    Otherwise - this is a reason to contact Support directly for their assistance or advice.

    // Another suggestion was to check if the VPN protocol could be changed in F-Secure settings (like if the current state does not block access to app Settings). For example, change it to a different protocol (than the selected by default) and see if the Tahoe 26 can complete / initialize with it.

    No. This is a new computer with a macOS. I never set up a VPN on this computer.

    Based on your description, okay, I'll assume that regardless of which package you have (Total / Internet Security or whatever else is available there), these instructions from the Online Help / Guide are still valid: VPN. Generally, they apply to the F-Secure Total app (which includes VPN), but I do not think the process would be much different for macOS with another package / solution.

    it says: ""When you take the product into use, the app asks your permission to set up a VPN connection. You need to allow this so that VPN can monitor network traffic. Later, you can turn VPN on or off on the main view of the app.""

    I am not familiar with macOS (as I mentioned earlier), so I am not sure exactly when this question should be asked. If it is not when actually turning ON / enabling the VPN connection (but, for example, during the previous step for initially setting up this module) - did you see this step, when app asks your permission to set up a VPN connection?

    After reviewing the Knowledge Base articles and documentation, one way or another, permissions should be granted at some point through system settings even with Tahoe 26. In general, F-Secure should prompt / guide you to ensure that everything flows smoothly during the initial installation, I think. Maybe it is failed somehow. If so, can you verify the state of mentioned system settings (above and in my previous comment)?

    Of course. I don't see in reality, why location in the modern western world would affect the functionality of this product, especially when VPN are designed to manage the apparance of location.

    Sorry if I misunderstood you.

    The point is: F-Secure company, within the limits of its legal capabilities, technical or otherwise (as imposed by law, acts, rules or regulations; or stuff like agreements with partners and participation or non-participation in certain markets as part of such partnerships), may or may not provide its services to certain locations. I am not entirely sure whether such restrictions exist, or, more precisely, what they are (but they exist, as they are mentioned periodically).

    In such a situation, the user would not be able to legally purchase the product. And if he could somehow (bypassing the "legal" way), then the product might not function. But if such an option exists (to buy / purchase it legally), then the possibility of a problem arising due to this reason can be excluded.

    Since you did not specify such information (in general), the advice was simply to be sure that F-Secure VPN is officially supported in your market, so to speak.

    There may be many 'modern' reasons why or where it might not be possible to provide VPN solutions. The supplier company may not comply with local laws and requirements (often), the technology itself is banned (extremely rare), the company itself is on the banned list within certain market (rare), the market itself or location is on the banned or restricted list (rare). And many other reasons (including purely commercial ones)

    For example, EU-based or Swiss / Norwegian company cannot operate in the U.S. or offer software to U.S. citizens without being subject to U.S. laws (and sublaws like for California) to some extent. If we are talking about serious organizations.

    As of now, F-Secure (as an organization) has opted to comply with it, for example. I suspect some companies may not, making their products relatively more difficult to use. Or just they designed a way to avoid the 'borders' (while others may just drop 'support' for this certain market rather than legally comply with its requirements or making workarounds).

    In simpler forms and variations, for example, as proposed in the United Kingdom, a number of popular US-based services may be unavailable in general or for a certain category of citizens. In some situations, it is a website or web service that can be used as an application. In such a situation, someone would make a correction to their offer / solution, someone would stop officially providing services, and there would be other options as always. Anyway… I do not think your problems using a VPN on your macOS device are related to this. And the reason is somehow technical or kind of.

    Unless your local Internet Service Provider has restricted access to ports (which can be used by a VPN), servers (used by a VPN), a specific connection protocol, or something else. Which is sometimes the case.

    Again, I will try to suggest check this place: "System Settings :: General :: Login Items & Extensions" (Tahoe 26); And see if there is anything related to VPN (F-Secure VPN). At least, looks like that this is the place where your permissions for making VPN connections are resided even with Tahoe 26.

    Then, check if it is possible switch a VPN protocol in F-Secure settings.

    Then, check what is your F-Secure version? If it is not the latest one - to reinstall it (latest builds of F-Secure app for Mac with inclusions tweaks and support for Tahoe 26 / VPN sides).

    Thanks!

  • racker4Life
    racker4Life Posts: 6 Explorer

    Below is the response from F-Secure Support. For me, Options 1 and 2 failed, but they setting navigation paths are up to date and took just a few seconds to verify.

    Thankfully, Option 3 worked, and I did not need to reconfigure my password manager authorization and sync settings…. I am so happy because that step was what I was most afraid of.

    ________________________________________________________________


    1. Open System Settings > General > Login Items & Extensions and check the extensions section (network or system extensions). If F-Secure is listed there and switched off, switch it on, then quit and reopen F-Secure

    2. If the VPN still shows "Loading", reinstall F-Secure: open Finder > Applications > F-Secure folder, run the uninstall tool, enter your Mac password and restart your Mac

    3. Log in at my.f-secure.com with <YourAccountDetails>, select Add device > My device, download the Mac installer and install it. When macOS asks to allow F-Secure's extension or VPN configuration, choose Allow