VPN installation requirements

Novice

VPN installation requirements

Which particular items are required to be activated on either/both the PC and the Modem for VPN to work properly:  

IPSec Pass Through  ?

PPTP Pass Through ?

L2TP Pass Through ?

 

Are any of the following

Application Layer Gateway Settings
required to be off or on ? :
RSVP  ?
FTP  ?
TFTP ?
Kerb88 ?
NetBios ?
Ike ?
RTSP ?
Kerb1293 ?
H225 ?
MSN ?
SIP ?
ICQ  ?
IRC666x ?
ICQTalk ?
Net2phone ?
IRC7000 ?
IRC8000 ?

 

IF Ping Blocking is enabled, does this prevent VPN from working?

Does VPN not work when "Hardened Mode" is on ?  i.e. with certain firewalls, security systems.?

Is VPN hindered by having the Modem set such that only specific MAC addresses can connect?

 

I am asking, because I like to know the requirements before I buy.   If you don't know, then ask someone

who does know, within the company.   Thank You!

1 REPLY 1
Moderator

Re: VPN installation requirements

Hello @Alex_the_medium

 

Please refer the below article describe how to configure and set up port in order to connect to Freedome for your devices

 

https://community.f-secure.com/t5/F-Secure/Port-configuration-for-Freedome/ta-p/55701

 

https://community.f-secure.com/t5/F-Secure/Port-configuration-for-Freedome/ta-p/75829

 

To know more about what encryption does Freedome use to secure the traffic?

 

https://community.f-secure.com/t5/F-Secure/What-encryption-does-Freedome/ta-p/81881