What do the F-Secure SENSE Router display symbols mean? This article explains what the various symbols on the F-Secure SENSE Router display mean.
| Display | What it means | What to do |
|---|
| No lights | SENSE Router has no power. | Check that the SENSE Router is plugged in. |
| The display brightness is too low or display is switched off. | Change display brightness from the app settings. |
| Whole display lit |  | SENSE Router is booting up. | Wait for a few minutes. If nothing happens, unplug the SENSE Router and then plug it in again. If the problem persists, a factory reset is needed. |
| Static squares |  |
| Pulsing squares |  | SENSE Router is ready for pairing. | Press the blue button on the back of the SENSE Router. |
| Pulsing connection |  | Internet connection to SENSE Router is down. | Check for loose cables or try restarting your router. |
| Four (4) numbers |  | Pairing code. This appears after you press blue pairing button. | Follow the instruction in the SENSE Router app. |
| Rotating squares |  | SENSE Router is connecting or verifying an action done by the app. | This may take a moment. Follow the instruction in the SENSE Router app. |
| Plus sign |  | Action completed. | No action needed. Get ready for the next step. |
| Exclamation mark |  | SENSE Router has encountered an issue. | Check the SENSE Router app. |
| Updating |  | SENSE Router is updating its software and will restart automatically. | Keep the SENSE Router plugged in and follow the instructions in the SENSE Router app. |
| Reset |  | SENSE Router was reset. | Wait for the SENSE Router to restart and then set it up. |
| Factory reset |  | SENSE Router was reset and restored to factory settings. |
| Time |  | You are online and protected. | Enjoy! |
