What is the firewall configuration requirement for F-Secure Rapid Detection Service (RDS) network sensor?
As the device needs to call the RDS backend for collection and management purposes, you must allow connections to the following hosts:
doorman.sc.fsapi.com over TCP port 443 lorsp.sc.fsapi.com over TCP port 443 lorsp.sc2.fsapi.com over TCP port 443 por1-timon-alpha02.sp.f-secure.com over TCP ports 4505 and 4506 time.f-secure.com over UDP port 123
Should there be no way of whitelisting on a per-domain basis, IP addresses are provided below:
184.108.40.206 over TCP port 443 220.127.116.11, 18.104.22.168, 22.214.171.124 over TCP port 443 126.96.36.199 over TCP ports 4505 and 4506 188.8.131.52, 184.108.40.206, 220.127.116.11, 18.104.22.168 over UDP port 123
Note: The IP addresses can change due to modifications to the backend environment; use the command dig +noall +answer <domain.to.check> (Linux) or nslookup <domain.to.check> (Windows) to get the IP address to which the domain <domain.to.check> resolves.
Article no: 000003525
After installing standalone Rapid Detection and Response (RDR), the GUI displays error device sensors are not operational and license expired
A most common mistake for standalone Rapid Detection and Response (RDR) sensor is installing MSI using the package without providing any MSI Transformation file (.mst) file, or any voucher in the command line. Those sensors will be in non-operation and expired. In order to fix this, the administrator needs to uninstall the RDR client first then reinstall it with the proper license. Note: There is a different subscription key type for Workstation and Server. The keycode is not compatible if used between the platforms. Below is the example for installation using the executable installer:
RDRStandaloneOnlineInstaller.exe --voucher ABCD-1234-BGFD --silent
For MSI package, refer to guide below to generate an MSI Transformation file (.mst) and embed the license key into the MSI package.
Refer here on installing the F-Secure Rapid Detection and Response client software for Windows Refer here on Installing the client software for Windows remotely
Article no: 000010539