PSB portal change log

123457»

Comments

  • PetriKuikka
    PetriKuikka Posts: 225 F-Secure Employee
    edited September 13

    Dear community,

    A new release 1.0.3329 is being rolled out with the following changes:

    New features:

    • Issuing an "install missing update" operation creates an installation log with status "pending delivery to client" for that patch. This installation status will be shown before the client responds to the installation request. It also temporarily hides the update from the general missing software updates page to better display which updates need action.
    • Software Updates missing patches are now also filterable by platform type.

    Fixed issues:

    • CVE IDs are now correctly aligned in the Software Updates Installation History table.

    Unfortunately this fix did not really fix the problem yet: Security events loading fails for some customer after 2 or 3 pages are loaded and it just keeps showing in loop same events.

    We are working on new fix now.

    EPP Team

  • PetriKuikka
    PetriKuikka Posts: 225 F-Secure Employee
    edited September 16

    Dear community,

    A new release 1.0.3341 is being rolled out with the following changes:

    Improvements:

    • Application control events show exact reason and path to the installer.

    Fixed issues:

    • Now this is really fixed: Security events loading fails for some customer after 2 or 3 pages are loaded and it just keeps showing in loop same events.

    EPP Team

  • PetriKuikka
    PetriKuikka Posts: 225 F-Secure Employee

    Dear community,

    A new release 1.0.3364 is being rolled out with the following changes:

    New features:

    • Automated tasks schedule now have a hint how to write a CRON expressions
    • Automated tasks now have a new type of schedule "@on_software_changed" which runs a task every time when an application was installed, removed or updated

    Improvements:

    • Automated tasks again have "restart/shutdown if required" in Server profiles

    Fixed issues:

    • Infection actions like "Report a possible false positive detection" in Security Events could not be started and they just reported red error box.
    • The installation status filter now works in all languages in the installation summary view for missing updates.

    EPP Team

  • ŁukaszDrąg
    ŁukaszDrąg Posts: 7 F-Secure Employee
    edited September 29

    Dear community,

    A new release 1.0.3372 is being rolled out with the following changes:

    Improvements:

    • Missing and Installed patches are now grouped by bulletinId

    Fixed issues:

    • Exclude RDR standalone clients from Antivirus statistics calculations on Dashboard
    • Recognize Windows 11 and Windows Server 2022 in device details
    • Fix rendering of infection alert e-mail

    EPP Team

  • PetriKuikka
    PetriKuikka Posts: 225 F-Secure Employee
    edited October 5

    Dear community,

    Security events has been implemented with new front-end and filtering technology.

    New features:

    As a first phase we have added the possibility to filter with

    1. "Not equals" option.
    2. Filtering by multiple source and security types

    Next step is to add filtering by time ranges.

    Improvements:

    • This release also fixes the filter menu to stay always at the top of the page, so you don't need to scroll to it to change the filter.
    • Security events page loads also lot faster than earlier.

    EPP Team

    SaikatdaudtyMikaArasola
  • MiloszPiglas
    MiloszPiglas Posts: 2 New Member

    Dear community,

    new F-Secure Elements product names have been enabled in EPP portal.

    You can find more details about product name changes in article https://community.f-secure.com/common-business-en/kb/articles/9184-f-secure-elements-name-changes.

    EPP Team

  • PetriKuikka
    PetriKuikka Posts: 225 F-Secure Employee
    edited October 18

    Dear community,

    A new release 1.0.3409 is being rolled out with the following changes:

    New features

    • Added settings to show flyers that license is going to be expired soon (General settings → License expiration)
    • "Scan inside mailbox files" option was added to manual scanning settings in windows profiles

    Improvements:

    • Profile editor Automated Tasks CRON hint is improved and now works for macros.
    • Enabled compression of the scope tree loading and this should speed up it's loading time for bigger partners.

    Fixed issues:

    • Profile editor is very slow when editing Application control rules, if you have over 500 rules. This was improved by only loading 50 first rules by default.
    • Show EPP + EDR for computers / servers downloads card if company has only EDR subscriptions.

    EPP Team

    PS. We added few hours later one more new feature

    • Security events page can use the device UUID to filter the events and device UUID is show in the security events details. This alone is not really bringing that much value, but we are soon replacing the device details page Security events tab with filtered view inside security events.


  • PetriKuikka
    PetriKuikka Posts: 225 F-Secure Employee
    edited October 26

    Dear community,

    A new release 1.0.3430 has been rolled out to all portals with following changes:

    New features:

    • Secure events has a new filter "Time" before/after.

    Improvements:

    • Missing updates could be filtered now by category low security, moderate security and unclassified options.
    • Show new version of missing updates on missing updates and installation summary tab.

    Fixed issues:

    • Several stability fixes to navigation in Elements mode inside the EPP portal.
    • In Elements mode, scope selector does not update content when switching between the companies.
    • Help links in Add new device wizard now open in new tab.

    Removed features:

    • Last Subscription check column is no longer visible on device list central management view. This will be soon removed also from the device details page.

    EPP Team

    PS. We had bit of problems with clearing AWS caches with this release and therefore elements.f-secure.com was not able to take you to EPP portal for some time. Everything is fine now though.

    Saikat
  • touko_vaarnamo
    touko_vaarnamo Posts: 3 F-Secure Employee
    edited October 27

    Dear community,

    A new release 1.0.3433 has been rolled out to all portals with following changes:

    Fixed Issues:

    • Help links in Add new device wizard now are linked to correct articles.
    • Hide computer agent download card if has only RDR for server
    • Fixed the Offline device counting for malware definitions report. This will only fix the new coming data and old data won't be fixed in the graph.

    EPP Team

  • PetriKuikka
    PetriKuikka Posts: 225 F-Secure Employee
    edited October 29

    Dear community,

    A new release 1.0.3445 has been rolled out to all portals with following changes:

    New features:

    • Device details page has "Show Security Events" link instead of the own Security events tab. This link takes you to Security events page with filter that shows only events for this device.
    • Mobile profiles have 2 new settings
      • Malware protection / Metered Scan in Profile for Mobile. This setting is supported by the Android client 18.4.0019892 and newer.
      • Network protection / VPN Protocol. This setting is supported by the iOS client 18.4.274202 and newer.

    Remove features:

    • Last subscription check is removed from device detail page.

    EPP Team

  • Tomi
    Tomi Posts: 49 F-Secure Employee

    Dear community,

    A new release 1.0.3461 has been rolled out to all portals with following changes:

    New Features:

    • Schedule in Automated Tasks now supports random periods. For example tasks could be set to run at random hour between 9 and 17.
    • Certain Automated Tasks now support more exact schedule. For example @daily macro can now specify hours when the tasks should run (eg. @daily #9-17)
    • Network Location Settings now support current firewall profile

    Improvements:

    • Security Events App performance improvements with multiple entries

    Removed features:

    • Firewall profile automatic selection rules are deprecated. Rules should be moved to network location settings.

    EPP Team

  • PitkoTaipale
    PitkoTaipale Posts: 1 F-Secure Employee
    edited November 5

    Dear community,

    The new release 1.0.3461 which was rolled out yesterday has a new feature and it is being enabled today on all portals:

    Software Updates page has new third tab for 'Installation history'.



    EPP Team.

  • PetriKuikka
    PetriKuikka Posts: 225 F-Secure Employee

    Dear community,

    The new feature "Select virtual location" for Mobile profiles has been enabled in all production portals

    New Features:

    • The default VPN site and any available VPN sites can be configured from the F-Secure Elements Endpoint Protection portal.

    EPP Team

    DharmikMmarvson
  • lubami
    lubami Posts: 4 F-Secure Employee
    edited November 23

    Dear community,

    A new release 1.0.3499 is being rolled out with the following changes: 

    New features

    Redesign main firewall options in UI to reduce complexity

    Before:


    After


    Show device MAC addresses in device details











    Compare Windows profiles between each other:


    Improvements

    Improved description for Microsoft Office updates:

    Old installation summary

    New Installation summary

    Old installation history

    New installation history

    Old missing updates

    New missing updates

    EPP Team

    Michał

    Jaimsmarvson