Can't install FSCSP via Push-Installation

I have a smal Network and will install the client via Push-Installation.


The client are found and i can choice a jar-file and the PM try to push the Software to the client.

After five minute, maybe more or less, there comes a error:


"Vom Launcher-Dienst wurde ein Fehler gemeldet.

PM Server connection timeout"


Have anyone a solution for me?


  • MJ-perComp
    MJ-perComp Posts: 1,101 Superuser

    Most likely the local Windows firewall is or other settings in Windows block access to
    \\host\admin$ (try connecting that from a commandline "net use * \\<hostname>\admin$")


    But in a small network you might be faster by just exporting an MSI-Package from the PMC and run that manually on each client as administrator.  Finding the cause and fixing it usually takes much longer.


    if you need further assistance do not hesitate to contact our support (details below).



  • Good idea, but not the sokution :)


    When i connect the client i become a new drive-letter "z" and can read and write. But the FSPM say's me that they can't connect the client.


    See bellow picture.Picture from Fail

  • MJ-perComp
    MJ-perComp Posts: 1,101 Superuser

    You are not trying to install Client Security to a RDP-Server? That will not work!


    OK, so a local firewall is not blocking.

    The second part is about an RPC beeing issued. Did you enable Remote Registiry Service on all clients?
    see here for further details:


    As I wrote before: consider using the MSI if you need to walk to each PC anyway...

  • Ups, sorry. Let me explain the Network-Configuration :)


    • Server is windows 2016 as DC
    • Windows 10 Release 1709 as Workstation with RDP
    • another Windows 10 Release 1709 as Support-Workstation, also as RDP configured

    This computer is installed at VMWare 6.


    • Two Windows 10 Release 1709 configured as Thick-Client in the Frontbase

    The Local-Policy is configured by default as "classic"


  • EDIT: Forgot, all clients are member of the domain :)

  • MJ-perComp
    MJ-perComp Posts: 1,101 Superuser
    The RRS is turned OFF by default:
    see here how to change that:
  • Thanks for the Link.


    But also with this Registry-Entry and te local-policy-Entry dosn't start the automatic installation.


    When i try to install manualy, it's installed, but there isn't listet in Policy Manager.

  • etomcat
    etomcat Posts: 1,319 Superuser



    > When i try to install manualy, it's installed, but there isn't listet in Policy Manager.


    Have you done the right-click and "Import auto-registered new hosts" in F-Secure PM Console?


    Best Regards: Tamas Feher, Hungary.





  • Yes, i try it, but it dosn't work...


    Th client is not in the Policy Manager

  • MJ-perComp
    MJ-perComp Posts: 1,101 Superuser

    Go to a client and try to connect to

    use a standard browser with no proxy settings
    it is safe to accept the certificate warnings


  • Ok, thanks, i found the fail...


    It whas the Windows-Firewall at the Server, it whas activ.


    I disable it and then the Push-Installation start


    Many thanks, Matthias

This discussion has been closed.