-
PSB Workstation client version 10.60 with full Windows 10 support release
PSB Workstation 10.60 is intended for new workstations that are already running on Windows 10 (clean installation). The client carries the same feature level as 10.50 with added Windows 10 support. Workstations that are running on older Windows OS are not required to be updated to 10.60. Version 10.60 is expected to be…
-
Whitelist IP on Intrusion Prevention
Hello all, we're planning to deploy a vulnerability assessment tool on our network that will scan all PCs periodically. Is there a way to configure FSecure in order that it doesn't run intrusion prevention checks on the traffic coming from the IP address of the VA tool? If not, users would receive lots of Intrusion…
-
Email and Server Security leaking
Hello, We've been using F-Secure Email and Server Security for some time and been quite pleased with the product. Some days ago there's been a change in the functionality with this product. We started to receive a lot of spams on our mailbox server without the Email and Server Security beign able to scan the messages. It…
-
License Key is visible in client computers
Hi! Just noticed that our company's PSB's licence key is visible in client computers. As seen in the pic. How do I prevent that? Allready some students have been able to install Fsecure in their own computers.... Thanks.
-
Cumulative update for Windows 10 (KB3093266) prevents PSB client intallation
This applies to PSB Workstation Security 10.60. Microsoft have published a cumulative update for Windows 10 (KB3093266). This update introduced a wide-ranging block on an installation component that F-Secure uses. The unfortunate side-effect of this is that the installation of F-Secure PSB Workstation Security 10.60 on…
-
Re: Cumulative update for Windows 10 (KB3093266) prevents PSB client intallation
Will there be an update for the installation package? Its quite annoying when doing a mass deployment on the Windows 10 computers which have allready the updates installed.
-
F-Secure Content Scanner Server error
Dear F-Secure, On our Exchange Server 2013 server, I have started getting messages similar to below for the past 20 hours. Product: F-Secure Content Scanner Server (OID: 1.3.6.1.4.1.2213.18) Severity: error (3) Message: Scanning 'message' by F-Secure Spam Scanner was unsuccessful. Reason: no response from cloud. 29 similar…
-
Error updating F-secure´s databases in Red Hat Enterprise Linux 6
Hi I get these errors when I try to update F-secure´s databases in Red Hat Enterprise Linux 6: AM F-Secure Security PlatformAM F-Secure Virus Description Database UpdateAMAM Copyright (c) F-Secure Corporation. All Rights Reserved.AMmgmtlib: DfpGetPolicy error 0xfffffe09, retrying...mgmtlib: DfpGetPolicy error 0xfffffe09,…
-
"Windows Installer service could not be accessed" Message while installing F-Secure Server Security
Hello guys This week I accessed F-Secure Policy Manager and realized that one of the servers hadn't been in contact with Policy Manager for a while. When I accessed the server, I discovered that F-Secure Server Security was not installed anymore. It was strange because I didin't uninstalled it or tried to update it. The…
-
f-secure for workstation deinstalleiren
Hallo, I am new and almost without no knowledge about f-secure. I need to remove "f-secure for workstation 11.5" form dozen of machines using the management console. The problem is, i have no idea how to make it. Would someone give me a little hint? Thank you
-
Linux Security 10.00 support for RHEL 7 and Ubuntu 14.04 (in short: not supported)
We've received questions about latest Red Hat Enterprice Linux and Ubuntu LTS regarding the Linux Security 10.00 and if those new versions of these distros are supported by it. Unfortunately they are not. We will support RHEL 7 and Ubuntu 14.04 with the next release of the Linux Security. The release schedule for next…
-
F-Secure with Comvault
We are using F-Secure on our Fileserver and Comvault to archive the windows files. Now i have the problem when i open a archived file the F-Secure Gate Keeper brings an Error an the fileserver is not resonding. After a restart everything works, until somebody will open an archived file again. Did somebody have a idea.
-
Master caution - two customers report FSAV ESS "failed to scan mail" possible wrong update in AUA/AU
Hello, Possible master caution incident - two independet hungarian customers suddenly report FSAV ESS "failed to scan mail" possible wrong update in AUA/AUS? One of them: non-clustered, Win2008 R2 Std + Exch 2010, FSAV for Exchange 11.01 build 157, first e-mail arrived in the quarantine today at 13:07 CEST, 900 alerts…
-
Notepad++ harmful?
I used the installer from here: https://notepad-plus-plus.org/repository/6.x/6.8.3/npp.6.8.3.Installer.exe Anti-Virus for Workstations says "DeepGuard has blocked a harmful application in your computer" when I try to start it. And I also just manually updated the definitions just to be safe. Still declared as harmful.
-
PSB + Freedom for business endpoint and mobile total cover
Hi there So I am right before implementation of the endpoint clients and my plan was to implement it to all computers and mobile devices of my users, except for IOS devices which aren't covered by Mobile Security. And then I learned about freedom for business, which seems to be a better mobile protection suite. So now I am…
-
Error installing F-secure antivirus server 9.0 from Policy Manager
Hi, I´m trying to install F-Secure Antivirus Server 9.0.0 from Policy Manager on a host with Windows Server 2008 R2 Standard. This is the error: The Launcher service has reported an error. The F-Secure installation process was cancelled because of badly formatted or incorrect installation instructions. Win32 error code: 0…
-
Delphi XE validation failures
Program used by the client company, F-Secure installation is complete, the execution of the program will jump failed validation error page, the user confirm the current F-Secure DeepGuard in Enhanced Process Monitoring Enabled = Disabled will be used normally, I ask what is the solution ? or what kind of information I sent…
-
Active Directory (AD)
Can PM import host names from AD?
-
Virus definitions Update
We use the offline Scan agent on our ESX Server, now i have the problem that the Virus Definitons Update Time in the PM is not correct. In the LOG on the server it is a differnt Time as in the PM. Have anybody a idea.
-
New here, so hello, and question about endpoint identification and implementation
hello there I've just signed up with a local partner for F-secure as the endpoint solution for my company. I'll tell you that I've tried just about any big player in the market right now that offers endpoint protection with centeral cloud management and F-Secure is the winner as far as I am concerned. (I fully tested over…
-
PSB portal: accidental deletion
hi all today I deleted accidentally a pc from portal. I unistalled the suite with the latest official unistall tool. I installed again the software and it refuses the serials and of course i don't see the computer on portal. How I can solve?
-
Discover Unamanaged hosts in branch offices
Hello We are looking into a large Business Suite deployment with multiple branch offices behind leased lines. One concern is how to discover newly attached hosts that are unprotected/unmanaged. I know about the new Autodiscover windows hosts based on Active directory, but I would like your opinion on other tools that do…
-
Spam rule E-mail and Server Security 11
Hello, I tried to implement some custom rules and it doesn't seem to work maybe I'm doing something wrong. Let's say: I want to block the word or a word containing "gorzug" in the subject or in the body. So I put these 2 lines: body GORZUG /gorzug/i score GORZUG 5.0 I tried in fssc.cfg or in local.cf, restarted F-Secure…
-
Remove policy inheritance
Hi, PMC 12.00 In advanced mode root, if I set up a table, when I want to change settings on the host, I can not delete or edit settings, Is it possible to remove the policies of inheritance? Regards,
-
Can F-secure force all pc connections to disconnect?
Hi everyone! I have small network that has few Windows 7 PC's and Windows server acting as proxy. All of these have newest F-secure Antivirus installed. Some of these PC's have problem that about once a week all lan connections disconnect for 5 seconds. Only things that are common with these PC's are Windows 7 and…
-
Linux Cent OS 6.6 installed Policy Manager for Linux
Policy Manager for Linux 11.31 version was originally installed, I need him to be upgraded to version 12.00, but SUPPORTED PLATFORMS AND LANGUAGES is no longer supported, can I upgrade? Upgrade Policy Manager for Linux version if step by step instructions?
-
Moving Management Server, DB, Policies etc.
Hi, I'v inherited a Policy Management Console/Server Version 11.30.60634 - with 4100 Clients and Servers. This is currently running in Windows Server 2003 r2 - This machine is very limited in its resources. I would like to move this to a Server 2012 r2 and would also like to upgrade to F-secure policy manager version 12.x.…
-
Linux Cent OS 7 installed Policy Manager for Linux
I try CENT OS 7 installed POLICY MANAGER FOR LINUX version 12, but Virus definitions on the server display has been no Does CENT OS 6 with the original installation methods are different? Also I in the newly established CENT OS 6 installed POLICY MANAGER FOR LINUX version 12 did not happen this situation, but sUPPORTED…
-
Client Security for MAC
Hi, does F-Secure Business Suite support MAC client Security ? I have 30 MAC machines beside Windows machines and want to install and manage them remotly from Policy Manager. thanks,
-
Minimum number of servers for Scanning and Reputation Server
Hi! I'm planning of deploying Scanning and Reputation Server. What would be a minimal amount of servers (or workstations) running on virtual environment that SRS made a noticeable boost in performance? Ofcourse that depends on various things, but can you give me rough estimates?
