-
policy manager can not be accessed in fsecure 12.4 (administration module - a connection with the se
I have problems in acessing the policy manager. I tried to reconfigure port as shown, restarted the services but the problem persists. Any Ideas ?
-
Configure schdule scan
Dear all How to configure scheduled scanning in fsecure policy manager 12 and how to push to client systems.I already configured like this in advance view "/t23:59 /b2017-11-11 /rweekly"(i want start from 11.11.2017 and scan will start @11.59 night...kindly share the details...Thanks in advance
-
F-Secure Policy Manager Update / Proxy Update
Hi All, I'm about to upgrade my current F-Secure Policy Manager from version 12:30 to a version 13. I've done it on my test setup with no problems, but in my production environment I also need to upgrade my proxy servers. Currently when I installed my Proxy servers I did it by following this guide:…
-
How to update F-Secure Client Security Manually
Dear All, I have a client who has a secure location and he wants to update client security manually.is there a way to update client security without downloading fsdbupdate daily. Thanks
-
CS 13 fails to install
Anyone having an issue installing 13? I have a test laptop. currently win7 64pro with 12.30 installed. It has the required KB2999226 installed. I downloaded the jar and imported it into PM13. exported as MSI. Installation results in a 1603 fatal error in the event log. tried the msi as a standalone (not exported from PM)…
-
Client Security 11.60
Hello, Please help explain the updates for Windows XP. FSecure released the latest version of ClientSecurity 11.60 for Winodws XP Now FSecure has issued a PolicyMangerServer 13.00 which has a new GUTS2 protocol The Release Notes 13.00 describes "BackWeb distribution still remains for compatibility with 12.x series." This…
-
PM upgrade 12.4 to 13 now can't access localhost PM
this is a single purpose server. Windows 2012. nothing on it has changed other than upgrading it from 12.4 to 13. Now I can't loginto PM locally. I get the "cannot connect to localhost:8080...." checked the registry to make sure nothing changed. admin port is at 8080. https port is at 443 and httpportnum is 80. suggestion?…
-
GateKeeper service causes big slow down/lag
Hello, Since a few days we experience some strange issues on our fileserver and rds server. The RDS user profiles are redirected to the fileserver but on another disk. I upgraded F-Secure Server Security from 11.x to 12.x but the problem remained. I noticed that when I had most of the f-secure stuff disabled exept for the…
-
problems with firewall and deepguard in CS13
Dear F-Secure-Team, after updating client from CS12.32 to CS13 (with PM13) and without changings setting anywhere I have problems with the firewall! Problems with FTP: I can open active ftp-sessions, connect to ftp-server but commands like dir, ls, get or put result in errors. Trying to connect with Teamviewer in local…
-
Dropped feature in CS 13.00
Why was dropped feature - E-Mail scaning in F-Secure CS 13.00?
-
The ip of fsbwserver.f-secure.com?
From the log, we found some ip addresses of fsbwserver.f-secure.com, but we cannot confirm does it correct or not from https://community.f-secure.com/t5/Business/IP-addresses-for-F-Secure-update/ta-p/11407 Would you please help to check it?
-
connection control session with Google Chrome in Internet Security 13.00
We have just installed FSPM 13.00 and Internet Security 13.00. at least one user has a problem when starting Google Chrome. If he starts Google Chrome, all connections from computer are lost and then Firefox shows a window, saying: "Connection control is active". Where can I change this? Is this an policy option in FSPM?
-
F-Secure Policy Manager - Block user from creating own Firewall Rules
Hi All, I'm facing a weird problem here, that I did solve in one of my other Installations, but this time if won't work . When I set up the Policy Manager and Locks all the functions so the user can't edit anything, I still see that the user are able to Open a Port. I double cheked the other installation and made sure that…
-
Problem with deploying new gatekeep appliance 5.50
Hallo, we are getting following error: It appears that you do not have JavaScript enabled, please contact your administrator. Could not convert field 'spec' of structure 'com.vmware.vcenter.vdcs.floppy_mode What can we do? We tried on ESX6.0 and ESX6.5 Thx in advance
-
What is the role of data analytics in mobile app retention?
Today data and analytics mean a lot for the global tech-centric industries. From leading manufacturing companies up to the top names in the services sector, data analytics has become one of the most essential and vital helping hand in terms of improving their various products/services and reaching the expected consumer…
-
Proofpoint - Attachment gets rejected
Hi, A customer is trying to send us an attachment (.zip) and its size is ~6MB and its only 1 file. Why it is not coming through? Status: Rejected Final Rule: maxsize Firewall rule: maxsize : size greater than 25MB or Attachment count greater than 256 or Total Umcompressed Attachment size greater than 100MB or File count in…
-
Ports beeing used by Policy Manager Proxy 13
Hi, I've just rolled out the new Policy Manager Proxy 13 On the servers I've used there is a WSUS and a Baramundi DIP installed, so i've changed the default communication ports for the PMP13 ... http = 8080 and https = 8443 in the PM Config for the FS Agent for auomatic Updates I have put these settings: Prio 10 address:…
-
Undistributed Policy
The Policy distribution status is UNDISTRIBUTED. How can fix that?
-
System Center Configuration Manager and F-Secure Client Security Deployment Issues
Hello f-sec Team, please fix this issue. the problem still occures while importing the MSI File to SCCM. This hint is showing up since FCS 11.50. In Task Sequence Deployment ist happens randomly that the f-secure installation breaks the Sequnce whith no error in logs. it stops working imediatly after the f-secure…
-
Wrongly blocked website
Hello, My client's website ibike.fi is blocked because of malware/virus. However, the web page has been remade from scratch, but the webpage still says that the site is infected. Can You please do a rescan promptly? BR, Jani Edit: Removed hyperlink
-
How to manage Email and server security?
Hi! Yesterday I was forced to remove email and server security from our email server, since I could not manage the settings via web console. I'm running server 2008r2. What are my options to manage Email and Server security settings? I recall asking for a management console for servers (the same the workstations got)…
-
PMC Shows different version than clients
Hi! I have a bunch of servers managed by FSPMC. FSPMC shows incorrect version for all the servers in Status -> installed software. It shows me that the Product installed would be Server Security version 12.00, when infact every server has Server Security version 12.11 installed. If I remove the servers from the console and…
-
The FSGKSH service blocking DNS lookups
Good morning, I have been unable to lookup DNS for the domain fs.klz.org.uk and after doing some research found it was F-Secure blocking the request. When I stop the FSGKSH service the DNS lookup works fine, when the service is started it fails again. So my questionis how do I stop F-Secure from blocking DNS requests to…
-
Failed to install scanning service using Command Line scanner
Hello f-secure, I'm using "scan.exe" (Command Line Scanner 32-bit) to install scanning service in window 2012 r2 standard but it returned error > \scan.exe --service install F-Secure Command Line Scanner 11.00.19100Copyright (c) 2005-2011, F-Secure Corporation. All rights reserved.Please see accompanied readme.txt for…
-
F-SECURE CLIENT SECURITY 12.31 NETWORK CONNECTION MALFUNCTION IN CLIENT PC
We are using F-secure Client Security 12.31 in our clients. In some of the machines there is a cross mark on F-secure logo and showing network connection malfuction. Further in the machine F-secure AntiVirus Firewall Daemon service is in stop state and could not be started. All components of F-secure are properly installed…
-
Description: Firewall alert. More than 10 alerts in 10 seconds, one or more alerts omitted. Action:
F-secure varottaa yhtenään palomuurin blokkaamista yhteyksistä. Mistä tämä johtuu? Kyseinen Windows 10 kannettava on wifi verkossa, jossa reitittimessä oma palomuuri päällä, uPnP pois päältä, eikä portti forwardointeja lainkaan. Miten koneen softamuuri voi edes joutua blokkaamaan yhteyksiä joiden pitäisi jäädä reitittimen…
-
Policy Manager - Centralized host alert forwarding from Policy Manager via email
Hello, is there a guide to configure "Centralized host alert forwarding from Policy Manager via email" ? Thanks Steven
-
Automatic delete of old alerts and scanning reports
Hi to all Is there any setting in policy manager console for autodeletion of old alerts and scanning reports from the server.
-
H2DB DATABASE MIGRATION TO MYSQL
Hi to all We have migrated H2db database to MySQL in one of the standby server for trial. My sql and H2db database reside in the same server .i.e in C : drive mysql and in D: drive H2db database. Q1. I want to know the mechanism of policy manager console from which database it operates. As I have checked policy manager…
-
outlook crashes after forwarding Email
Outlook 2010 on Win7x64 crashes (not responding cca 10-15 sec) after forwarding Email and then sent email. When i stop FSMA (Clinet Security 12.30) forwarding works fine. Email has link for downloading eBill. How can i Exclude scaning Outlook? I exclude .ost and disabled Scan Incoming and Outgoing E-mail in Anti-Virus…
